Category
Flap peen Accessory


Suhner:ROTOMAX 1.5
Suhner:ROTOMAX 1.5
Power:230V,50HZ,1Ph。
Net weight:27.4Kg
Allow stepless speed regulation through the control panel
LED display to show the rotation speed
Rotation speed range500-15000rpm
Mild start and built-in brake
Three types available: With-base, Movable, and hanging type


Portable Flap Peening Device FlapSpeed
FlapSpeed?Comply with or even exceed all currently used Flap Peening standards, such as AMS2590, Nadcap, OEM requirements and Military standard.With sturdy and durable 5.7 inch (145mm) QVGA touching-type colorful display screen as the user interface.Installed with integrated saturation curve solver(3M/AMS2590 and 0.77) available in two types of magnetic correction functions, small but powerful hand-held clamp holder with flexible shaft 25ft(7.7m) long.Best rotation speed can bemaintained along the whole working process. Automatic stop and alarm will be issued once the process limit is exceeded. Important processing data can be stored in a U-key. The device is accompanied by stopwatch and countdown timer, compatible with multi-language and measurement system, calibration certificates and user manuals provided.


Tungsten Carbide Nozzles
Tungsten carbide nozzles have moderate hardness and density, high temperature resistance, corrosion resistance and long service life. They are widely used in the sand blasting industry and shot peening, and are ideal accessories for sand blasting equipment.abrasive use.


Silicon carbide venturi nozzl
Silicon carbide venturi nozzle
with long life and low cost at high cost performance which used in blasting more and more.


Tungsten Carbide Venturi Nozzle
Tungsten Carbide Venturi Nozzle
Due to its hardness, low density and excellent wear and anti-corrosion, Tungsten Carbide.Nozzles have been widely used in sandblasting and shot peening equipment, offering a long life with optimum air and abrasive use.


Sand Blasting Rubber Hose


Rotary nozzle head
Rotary nozzle head features an extremely compact design and enables the internal shot peening of bores and grooves with high precision.it is especially suitable for robot applications. The rotary head movementis performed by an integral direct drive which features redundant speed monitoring - a guarantee for the highest degree of process reliability.Even existing machines can be retrofitted with this head, for example by fitting a Stand-Alone control box and system interface.


Inner Hole Blasting Nozzle
Inner Hole Blasting Nozzle
We supply inner hole blasting nozzles of more than 100 types. The inner diameter can range from φ0.091”-0.71”(φ2.3-18mm)to meet various customers'need. We also supply customized products.


TubePipeline inwall blasting gun
Tube/Pipeline inwall blasting gun
Suitable for 400mm-900mm inner wall tube/Pipeline blasting or shot peening.


WECO Separator Siever Kit
SWECO Separator
SWECO Separator has a base made of carbon steel and coil springs of high tolerance, its surfaces with epoxy resin antierosion
coatings. This specific motors installed in SWECO Separators. SWECO Screens have frames made of SUS304 stainless steel and surfaces being shot peened by glass beads.


Portable controllable pneumatic shot peening machine
Portable controllable pneumatic shot peening machine
Type:SMARTPEEN
Suitable for Shot peening and maintenance in Aviation parts. Integrated with touching control screen, pressure control module, flow control module, shot peening time and strength control module, shot peening saturation curve module, Closed-loop shot peening system, Material negative pressure recovery, portable movement for easily operation.


W.S.Tyler Ro-Tap Sieve Shaker and Sieve
It works by combining horizontal rotation and vertical tapping movement to simulate manual sieving. Driven by a vertically installed and fully closed motor with 1/4 horsepower, this equipment can hold 6pcs of full-height or 13pcs of half-height sieves at one time. The sieves have mesh size ranging from 20μm to 125mm, sieve frame of bronze or stainless steel, and sieve diameter of 203mm or 200mm. Optional accessories to this equipment include sieve cleaning device, noise absorption cabinet and particle analysis software.Maximum load of media: 3kgs.


Portable Needle peening tool
Meets all aviation AMS2545 Shot peening and maintenance standard. The principle of the needle peening avoids the Foreign Object Debris (F.O.D) in the whole shot peening operation. The strong power generates sufficient shot peening strength within 5N-15N and 4A-16A to meet all the requirements of normal shot peening request and further more to generate the required shot peening compressive residual stress. Shot peening data real-time storage, convenient output by USB for further process analysis and archive.Shot peening process is controllable and also repeated accurately. Complex parts structure, easy to be achieved by this shot peening equipment.


Fluoro-Finder III Tracer
Fluoro-Finder III Tracer
Effectively display the coverage after shot peening/blasting process.
Mirroring the uniformity and completeness of the shot peening process in a direct visual way.
Help avoid 200% coverage for complete shot peening.
Meet specification AMS-S-13165, GE D50TF9 A Rev.S3.
Get liquid form by blending with methyl ethyl ketone(MEK) Paint it on the part surface, and then wait until it gets dry before starting shot peening process.


InspectViewTM Camera
InspectViewTM Camera
Especially applicable to inspect the coverage of inner hole after shot
peening/blasting.
Tip Diameter 5.8mm, with four variable brightness LEDs.
Equipped with 10X, 20X, and 30X magnifying glasses.
Allow to take quality pictures and videos of the inspection area.
Weight only 397g, truly portable, easy to use.
Installed with 3.5” extra wide TFT display.
Pictures and videos can be imported to a computer through USB
interface.
Equipped with 1 or 2 Gygabyte memory card to store thousands of
pictures.


Coverage Checker
Coverage Checker
Automatic check to avoid human error.
Keep stable performance and generate consistent results by different operators.
Easy to use, even a beginner can use it as proficiently as an experienced operator.
Applicable to inspect the coverage of narrow areas on the aviation parts as well as the inner spring coil.
Connectable to nozzles to check the coverage of inner holes.
Accompanied by focus adjustment tool to check the coverage on curve surface.
With USB interface (data line included) to connect with a computer.
Compatible with Windows XP(32 bit) and Window 7(32bit) operating


24Vdc Series MagnaValves use for Wheel Blast Machiens
24Vdc Series MagnaValves
use for Wheel Blast Machiens
Specifications
Power: +24 Vdc 2A (50 VA) ±24 Vdc
Media: Cast steel shot and Cast steel grit
Mode:Normally closed
Flow output:0 ? 10 Vdc
Servo Command Input
Controllers:AC-24 POT-24


MagnaValves use for Air blast machine


FC-24 Controller
FC-24 Controller
Power:24 Vdc
Monitors flow rate: lb/min and kg/min
Digital display
High-low alarm contacts
Accepts remote command setpoint
Provides analog recorder output
Easy panel mounting
GE Compliant
use for magnavalve:576-24, 577-24,578-24, 579-24, 580-24, 590-24,500-24,700-24


Previous page
1
2
Next page

SCAN IT
Visit us by Mobile
Add:Room 1611,International Trade Tower, No.107 Liuquan Rd.,Zibo, Shandong ,P.R.China
Tel:+86-533-3190669
E-mail:amf@amfaerospace.com
Customer message
Description:
Copyright © 2019 AMF Aerospace Material Co., Ltd. All rights reserved 鲁ICP备19029004号