Category
Flap peen Accessory
White Aluminum Oxide
Its made from industrial aluminum oxide powder, which is melted in electric arc at high temperature of more than 2000 degrees and then cooled. It is crushed and shaped, magnetic separation to remove iron, and then sieving into various particle sizes. Its texture is very high dense and hardness, and with sharp angle. Aluminum oxide (Al2O3) content is more than 98%, containing a small amount of iron oxide, silicon oxide and other components, white appearance. It is suitable for manufacturing ceramics, resin bonded abrasives, grinding, polishing, sandblasting, precision casting, etc. it can also be used for manufacturing high-grade refractories. It is characterized by small crystal size and impact resistance.
Glass Bead
The high-quality glass raw materials been melted, cooled into a ball, and then annealed to make it compressive and shatter resistant. The surface of particles is smooth and transparent, free of surface dent, bulge or stain.Different particle and application which can be matted or glossy treated.The component treated by sandblasted can achieve the special effection.
Cast steel Grit
Application:
Used for sandblasting the surface of castings and steel structures.
Standard:
SFSA20-66 Cast Steel Abrasive, SAE J827 Cast Steel Shot, SAE J1993 High Carbon Steel Grit, YB / T5149-1993 Cast Steel Shot, YB / T5150-1993, Cast Steel Grit, ISO11124-3 High Carbon Cast Steel Shot and Grit.
Wire cut pill
According to different steel material, it can be divided into Stainless steel cut wire, High carbon steel cut wire and Low carbon steel cut wire. There are several particles size with none-passivated (Cylindrical) or passivated (Round).
Generally, its life span around 3000-3500 times.There is no specified scrap standard at present. In the process of recycling, it will wear slowly and eventually become dust. Almost any surface treatment of workpiece can be used by this grit.
Carbon Steel cut wire
According to different steel material, it can be divided into Stainless steel cut wire, High carbon steel cut wire and Low carbon steel cut wire. There are several particles size with none-passivated (Cylindrical) or passivated (Round).
Generally, its life span around 3000-3500 times.There is no specified scrap standard at present. In the process of recycling, it will wear slowly and eventually become dust. Almost any surface treatment of workpiece can be used by this grit.
Chrome Corundum
Chrome Corundum
Application: grinding, polishing, sandblasting, refractory
Standard: FEPA-42-2006, GB / T 16458-2009
Apricot Grit
Walnut sand
Application: Remove paint, deburring, polishing, filtering on metal surfaces.
Black Silicon Carbide
Black Silicon Carbide
Applications：
Polishing, polishing, and refractory materials for ceramics and metals
Polishing and carving of rocks and stones
Non-metal grinding
Hard surface treatment
Consolidated abrasive
Standard: FEPA-42-2006, GB / T 16458-2009
Green silicon carbide
Its basically like black silicon carbide, but the raw materials and manufacturing process are different. The product is green and translucent, and its hardness and purity are better than black silicon carbide. Its elastic coefficient reaches 410gpa, and it will not dissolve under normal temperature and pressure. When the temperature reaches above 1600 ° C, it will be consumed, and when it reaches 2815.5 °C, it will decompose. Green silicon carbide is suitable for grinding copper, brass, aluminum, gemstone, optical glass, ceramics and other hard alloy, metal and hard and brittle non-metallic materials. The micropowder can also be used as ceramic material. Due to the high purity of black silicon carbide, it is also widely used in the manufacture of refractories and various abrasives.
Carburizing Steel Shot
Introduction: Meet with AMS2431/5 specification. Used in aircraft large-scale part’s shot peening forming and various parts shot peening strengthen.
Product feature: Every single shot’s size keep in dimensional uniformity,high surface hardness and internal core soft , shot peening intensity uniformization. Unbreakable and high cycle life.
Garnet
Garnet:
Application: Used for sand blasting，water-jet cutting，metal polishing.
Plastic Grit
Dry stripping of parts as aluminum and fibergallss body vehicles and aircraft components.
Pretreatment (surface treatment): sand blasting before electroplating, painting, spraying, etc.the surface is absolutely clean, and the adhesion and anti-corrosion ability of the coating are greatly improved.
Ceramic Bead
Ceramic Bead
Application: Shot peening strengthen and sand blasting on the precision component.
Walnut Shell
Application：
Metal surface paint removal，deburring，polishing ，filtrating.
Cast Steel Shot
Specification:
FSA20-66 Cast Steel Abrasive,
SAE J827 Cast Steel Shot, SAE J1993 High Carbon Steel ：
Grit,YB/T5149-1993 Cast Steel Shot, YB/T5150-1993 Cast
Steel Grit,ISO11124-3 High Carbon Cast Steel Shot and
Grit AMS2431/1F AMS2431/2F.
Brown Fused Alumina
Applications:
use for blasting ,grinding,polishing of spare parts and refractory materials.
Sanding & polishing Flap with shaft , AX45
Sanding & polishing Flap with shaft , AX45
AX45 Application Mainly converted into flap disc with shaft and other special forms products. Sanding and polishing of metal surface, aperture, curved, concave and convex surfaces. This cloth has an excellent flexibility, good synchronization, perfect work surface. It can't burn workpieces and suitable for high speed grinding
S5500M
Sponge polishing Cloth，S5500M
Adopted the high density sponge, the backing is flexible. Taking advantage of the selected Alo or SIC grain, the product has long sanding life and smooth work surface, especiall ly suitable for all kinds of irregular curved surface polishing
Sanding Paper AP57
Sanding Paper ， AP57
AP57 is adopted specially treated coat can prevent the static efficiently. AP57 has a high anti-clogging property and is widely used in board material, furniture, wood floor, leather, textile, and metal. High-quality EWT backing paper, high tough and flexible, can be converted to different size rolls, different size belt, Velcro disc and so on. Special treated FEPA standard Aluminum Oxide abrasive grain, with higher performance, long grinding life, and excellent polishing surface.
Riken RMC AP57 with there excellent cutting action of the Aluminum Oxide grain enables an efficient sanding operation. The antistatic paper backing reduces clogging problems and improves the lifetime of the product.
Previous page
1
2
…
4
Next page
SCAN IT
Visit us by Mobile
Add：Room 1611,International Trade Tower, No.107 Liuquan Rd.,Zibo, Shandong ,P.R.China
Tel：+86-533-3190669
E-mail：amf@amfaerospace.com
Customer message
Description:
Copyright © 2019 AMF Aerospace Material Co., Ltd. All rights reserved 鲁ICP备19029004号